Tuning Series | Enkei Wheels https://enkei.com The leader in lightweight aftermarket wheels Tue, 15 Nov 2022 16:07:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.1 https://enkei.com/wp-content/uploads/2019/12/cropped-512-icon-32x32.png Tuning Series | Enkei Wheels https://enkei.com 32 32 TRIUMPH https://enkei.com/shop/wheels/tuning/triumph/?utm_source=rss&utm_medium=rss&utm_campaign=triumph Fri, 11 Nov 2022 18:24:39 +0000 https://enkei.com/?post_type=product&p=14248 Enkei MAT Technology]]>
Enkei Multi spoke wheel The Triumph
NEW
Enkei Multi spoke wheel The Triumph
Enkei Multi spoke wheel The Triumph Gloss Black wheels
Enkei Multi spoke wheel The Triumph Gloss Black wheels
Enkei Multi spoke wheel The Triumph Gloss Black wheels
Enkei Multi spoke wheel The Triumph Gloss Black wheels

TRIUMPH

The all-new Triumph is a ten-spoke lightweight wheel made using our MAT process, the same MAT process used to make the Enkei RPF1. Using our MAT Technology process creates a lightweight wheel while drastically improving the material property and strength of the wheel.  The ten sleek spokes give the Triumph a sporty lightweight profile that is commonplace on race tracks across the globe.  The Triumph is an ideal option for modern sports coupes and sedans like the Toyota 86 and BRZ, the Civic Type R (FK), Subaru WRX, IS250/300, Nissan Z34, and many others. It’s available in 17 or 18 inch with widths up to 9.5 and available in Gloss Black, Matte Bronze, or Storm Gray finishes.

• Sizes 17, 18
• Gloss Black, Matte Bronze, Storm Gray
• Spec-E Inspected
• MAT Tech

Enkei MAT Technology

Category:

MAT Technology
Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

Related products

This error message is only visible to WordPress admins

]]> T6R https://enkei.com/shop/wheels/tuning/t6r/?utm_source=rss&utm_medium=rss&utm_campaign=t6r Fri, 12 Feb 2021 16:33:23 +0000 http://enkei.com/?post_type=product&p=13897
  • Sizes 17, 18
  • Matte Bronze, Gloss Black, Gloss Gunmetal
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology]]>
    Enkei T6R Tuning Series Wheels Gloss Black
    Enkei T6R Tuning Series Wheels Gloss Black wheels
    Enkei T6R Tuning Series Wheels Bronze wheels
    Enkei T6R Tuning Series Wheels Bronze wheels
    Enkei T6R Tuning Series Wheels Gunmetal
    Enkei T6R Tuning Series Wheels Gunmetal

    T6R

    Enkei is excited to introduce the all-new T6R to our lineup. We’ve taken some of the most dramatic design aspects that have made the TS-5 so popular and utilized them to build an equally awesome 6-spoke wheel. The T6R is an ideal option for modern sports coupes and sedans like the Civic Type R, WRX, STI, Q50, Q60, Golf GTI, and many others. Available from 17×8 up to 18×9.5 in finishes including our popular matte bronze, classic gloss black, and striking gloss gunmetal.

    • Sizes 17, 18
    • Matte Bronze, Gloss Black, Gloss Gunmetal
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TS-7 https://enkei.com/shop/wheels/tuning/ts-7/?utm_source=rss&utm_medium=rss&utm_campaign=ts-7 Wed, 28 Oct 2020 15:04:31 +0000 http://enkei.com/?post_type=product&p=13672
  • Sizes 18
  • Matte Bronze, Gloss Black, Storm Grey
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology]]>
    Enkei TS7 TS-7 Tuning Series Bronze Wheels
    Enkei TS7 TS-7 Tuning Series Bronze Wheels
    Enkei TS7 TS-7 Tuning Series Silver Wheels
    Enkei TS7 TS-7 Tuning Series Silver Wheels
    Enkei TS7 TS-7 Tuning Series Gloss Black Wheels
    Enkei TS7 TS-7 Tuning Series Gloss Black Wheels

    TS-7

    The TS-7 is Enkei’s newest addition to the Tuning Series lineup. In fact, the TS-7 is essentially a revival of the classic Enkei RS-7. It’s not just a recreation of the old wheel though. The TS-7 utilizes Enkei’s innovative MAT technology in order to build a wheel that is both lightweight and strong. The TS-7 is available in gloss black, bronze, and storm gray, and all specs come with Enkei’s signature flat center cap. With sizing ranging from 18×8 up to 18×9.5, the TS-7 is a solid choice for cars like the Subaru WRX STI, Civic Type R, Toyota GT86, and many others.

    • Sizes 18
    • Matte Bronze, Gloss Black, Storm Grey
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TSR-X https://enkei.com/shop/wheels/tuning/tsr-x/?utm_source=rss&utm_medium=rss&utm_campaign=tsr-x Fri, 27 Dec 2019 17:02:12 +0000 http://enkei.com/?post_type=product&p=10528
  • 18 and 20 inch
  • Gloss Bronze, Gloss Black, Storm Gray (Select Sizes)
  • Spec-E Inspected
  • MAT Process
    • Enkei MAT Technology]]>
    Enkei TSR-X
    Enkei TSR-X
    Enkei TSR-X
    Enkei TSR-X
    Enkei TSR-X
    Enkei TSR-X

    TSR-X

    Introducing Enkei’s first-ever Tuning Series Wheel available in 20”. Enkei’s Tuning Series wheels have taken the market by storm thanks to their high-strength MAT construction and competitive pricing. Due to increasing customer demand for a lightweight 20” wheel in this series, we are proud to introduce the all-new TSR-X. Available in Gloss Black, Bronze, and Storm Grey, the TSR-X is the perfect option for those looking to go big while keeping weight down on their late-model sports coupes, sedans, and even crossovers.

    • 18 and 20 inch
    • Gloss Bronze, Gloss Black, Storm Gray (Select Sizes)
    • Spec-E Inspected
    • MAT Process

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TSR-6 https://enkei.com/shop/wheels/tuning/tsr-6/?utm_source=rss&utm_medium=rss&utm_campaign=tsr-6 Thu, 26 Dec 2019 16:54:07 +0000 http://enkei.com/?post_type=product&p=10525
  • 18 inch only
  • Titanium Gray, Matte Black, Matte Bronze
  • Spec-E Inspected
  • MAT Process
    • Enkei MAT Technology]]>
    Enkei TSR-6 Gloss Black
    Enkei TSR-6 Gloss Black
    Enkei TSR-6 Gloss Silver
    Enkei TSR-6 Gloss Silver

    TSR-6

    We’re literally putting a new twist on an old style. Taking inspiration from the iconic and super-light RPF1, we developed the all new TSR-6. With its twin 6-spoke design, it achieves an open look that promotes airflow to the brakes, but without sacrificing strength and rigidity. The TSR-6 is available in sizes ranging from 18×8 to 18×9.5 with PCD and offset configurations for a wide variety of high-performance cars.

    • 18 inch only
    • Titanium Gray, Matte Black, Matte Bronze
    • Spec-E Inspected
    • MAT Process

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TS-5 https://enkei.com/shop/wheels/tuning/ts-5/?utm_source=rss&utm_medium=rss&utm_campaign=ts-5 Wed, 25 Dec 2019 17:09:35 +0000 http://enkei.com/?post_type=product&p=10530 The all-new lightweight Enkei TS-5 is sure to be an instant classic in the tuning world.  The TS-5 is the wheel that will have everyone admiring it at a loss for words because it just does everything right.  It is remarkably simple and clean, relying on the tried and true 5-spokes and a lip formula, but the TS-5 gets the aesthetics just right.  

    It is the golden ratio in wheel form.  It screams motorsports and whispers class at the same time.  It is just as much at home on the track as it is on the street.  With 17” and 18” sizing and widths up to 9.5”, the TS-5 will suit a remarkable variety of sport sedans and coupes.

    • Sizes 17, 18
    • Storm Gray, Matte Bronze, and Gloss Black
    • Spec-E Inspected
    • MAT Technology
    Enkei MAT Technology]]>
    Enkei TS-5 TS5 Bronze
    Enkei TS-5 TS5 Bronze
    Enkei TS-5 TS5 Silver
    Enkei TS-5 TS5 Silver
    Enkei TS-5 TS5 Black
    Enkei TS-5 TS5 Black

    TS-5

    The all-new lightweight Enkei TS-5 is sure to be an instant classic in the tuning world.  The TS-5 is the wheel that will have everyone admiring it at a loss for words because it just does everything right.  It is remarkably simple and clean, relying on the tried and true 5-spokes and a lip formula, but the TS-5 gets the aesthetics just right.  

    It is the golden ratio in wheel form.  It screams motorsports and whispers class at the same time.  It is just as much at home on the track as it is on the street.  With 17” and 18” sizing and widths up to 9.5”, the TS-5 will suit a remarkable variety of sport sedans and coupes.

    • Sizes 17, 18
    • Storm Gray, Matte Bronze, and Gloss Black
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TM-7 https://enkei.com/shop/wheels/tuning/tm-7/?utm_source=rss&utm_medium=rss&utm_campaign=tm-7 Wed, 18 Dec 2019 17:49:46 +0000 http://enkei.com/?post_type=product&p=10545 For decades, mesh wheel designs have been popular for numerous applications ranging from luxury sedans to hardcore track machines.  It is truly a timeless design.  Enkei has put a literal twist on this classic style with the all new Enkei TM-7 Tuning Series wheel.  Utilizing a clean and balanced seven-split-spoke design, the TM-7 perfectly combines style with strength.  The TM-7 is built using Enkei’s world-class MAT process to keep its weight low for increased performance both on the street and the race track.  The TM7 is available in Storm Gray or Gloss Black with flat or concave face profiles, both with Enkei’s signature flat center cap.

      • Sizes 17, 18
      • Storm Gray, Gloss Black
      • Spec-E Inspected
      • MAT Technology
    Enkei MAT Technology]]>
    Enkei TM-7 Storm Gray Silver Mesh Directional Wheel
    Enkei TM-7 Storm Gray Silver Mesh Directional Wheel
    Enkei TM-7 Storm Gray Silver Mesh Directional Wheel
    Enkei TM-7 Storm Gray Silver Mesh Directional Wheel

    TM-7

    For decades, mesh wheel designs have been popular for numerous applications ranging from luxury sedans to hardcore track machines.  It is truly a timeless design.  Enkei has put a literal twist on this classic style with the all new Enkei TM-7 Tuning Series wheel.  Utilizing a clean and balanced seven-split-spoke design, the TM-7 perfectly combines style with strength.  The TM-7 is built using Enkei’s world-class MAT process to keep its weight low for increased performance both on the street and the race track.  The TM7 is available in Storm Gray or Gloss Black with flat or concave face profiles, both with Enkei’s signature flat center cap.

      • Sizes 17, 18
      • Storm Gray, Gloss Black
      • Spec-E Inspected
      • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TD-5 https://enkei.com/shop/wheels/tuning/td-5/?utm_source=rss&utm_medium=rss&utm_campaign=td-5 Wed, 18 Dec 2019 17:46:18 +0000 http://enkei.com/?post_type=product&p=10544 As directional wheels become more popular, we wanted to create one that not only offers a directional design but also keeps in line with Enkei’s commitment to making strong and long-lasting products. Made with strength and rigidity in mind, the TD-5 is a multi-spoke directional design and is offered in either Storm Gray or Pearl Black finishes. It is made using the same MAT process used to make one of the lightest strongest wheels in the industry, the iconic Enkei RPF1. This makes the TD-5 not only stylish but also strong and light weight. It is available in a concave and flat face profiles.

    • Sizes 17, 18
    • Storm Gray, Pearl Black (Black Machined with black clear coat)
    • Spec-E Inspected
    • MAT Technology
    Enkei MAT Technology]]>

    TD-5

    As directional wheels become more popular, we wanted to create one that not only offers a directional design but also keeps in line with Enkei’s commitment to making strong and long-lasting products. Made with strength and rigidity in mind, the TD-5 is a multi-spoke directional design and is offered in either Storm Gray or Pearl Black finishes. It is made using the same MAT process used to make one of the lightest strongest wheels in the industry, the iconic Enkei RPF1. This makes the TD-5 not only stylish but also strong and light weight. It is available in a concave and flat face profiles.

    • Sizes 17, 18
    • Storm Gray, Pearl Black (Black Machined with black clear coat)
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         KOJIN https://enkei.com/shop/wheels/tuning/kojin/?utm_source=rss&utm_medium=rss&utm_campaign=kojin Wed, 18 Dec 2019 17:46:01 +0000 http://enkei.com/?post_type=product&p=10543
  • Sizes 17, 18
  • Matte Silver or Matte Black
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology]]>
    Enkei Kojin silver five star wheel
    Enkei Kojin silver five star wheel
    Enkei Kojin Matte Black
    Enkei Kojin Matte Black

    KOJIN

    The Kojin takes the traditional 5-spoke design and adds just the right contours to give it an aggressive tuner look without being too loud about it. The Kojin is built using Enkei’s original MAT technology to achieve the ultimate in strength and light weight. The Enkei Kojin is where art and science meet to create the next big step forward in wheels. 17×9 and 18×9.5 are more concave than smaller width fitments (The photo on the left is of an 18×9.5 +15)

    • Sizes 17, 18
    • Matte Silver or Matte Black
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TSP6 https://enkei.com/shop/wheels/tuning/tsp6-2/?utm_source=rss&utm_medium=rss&utm_campaign=tsp6-2 Wed, 18 Dec 2019 17:43:58 +0000 http://enkei.com/?post_type=product&p=10541
  • Sizes 17, 18
  • Gunmetal or Hyper Silver
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology]]>

    TSP6

    The TSP6 is also built using Enkei’s original MAT technology to achieve the ultimate in strength and light weight. The TSP6 comes standard with Enkei’s signature flat center cap and is available in 17 and 18 inch.

    • Sizes 17, 18
    • Gunmetal or Hyper Silver
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>