Wheels | Enkei Wheels https://enkei.com The leader in lightweight aftermarket wheels Tue, 15 Nov 2022 18:57:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.1 https://enkei.com/wp-content/uploads/2019/12/cropped-512-icon-32x32.png Wheels | Enkei Wheels https://enkei.com 32 32 TRIUMPH https://enkei.com/shop/wheels/tuning/triumph/?utm_source=rss&utm_medium=rss&utm_campaign=triumph Fri, 11 Nov 2022 18:24:39 +0000 https://enkei.com/?post_type=product&p=14248 Enkei MAT Technology]]>
Enkei Multi spoke wheel The Triumph
NEW
Enkei Multi spoke wheel The Triumph
Enkei Multi spoke wheel The Triumph Gloss Black wheels
Enkei Multi spoke wheel The Triumph Gloss Black wheels
Enkei Multi spoke wheel The Triumph Gloss Black wheels
Enkei Multi spoke wheel The Triumph Gloss Black wheels

TRIUMPH

The all-new Triumph is a ten-spoke lightweight wheel made using our MAT process, the same MAT process used to make the Enkei RPF1. Using our MAT Technology process creates a lightweight wheel while drastically improving the material property and strength of the wheel.  The ten sleek spokes give the Triumph a sporty lightweight profile that is commonplace on race tracks across the globe.  The Triumph is an ideal option for modern sports coupes and sedans like the Toyota 86 and BRZ, the Civic Type R (FK), Subaru WRX, IS250/300, Nissan Z34, and many others. It’s available in 17 or 18 inch with widths up to 9.5 and available in Gloss Black, Matte Bronze, or Storm Gray finishes.

• Sizes 17, 18
• Gloss Black, Matte Bronze, Storm Gray
• Spec-E Inspected
• MAT Tech

Enkei MAT Technology

Category:

MAT Technology
Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

Related products

This error message is only visible to WordPress admins

]]> OVERLANDER https://enkei.com/shop/wheels/performance/overlander/?utm_source=rss&utm_medium=rss&utm_campaign=overlander Fri, 11 Nov 2022 17:17:19 +0000 https://enkei.com/?post_type=product&p=14236 Important: The Overlander 18x8, 5x108 bolt pattern fitment is a Special Order part number. Special Order part numbers do not go into production until ordered and will likely have a longer delivery time. The Matte Gunmetal finish is also a Special Order finish on all Overlander part numbers. Please consult with an Enkei Wheels dealer for details on availability and delivery times. Sizes 17, 18 Matte Black, Matte Bronze, Matte Gunmetal (Special Order only) Spec-E Inspected ]]>
Enkei Overlander Wheel for Crossovers
NEW
Enkei Overlander Wheel for Crossovers
Enkei Overlander Wheel for Crossovers
Enkei Overlander Wheel for Crossovers
Enkei Overlander Wheel for Crossovers
Enkei Overlander Wheel for Crossovers

OVERLANDER

The all-new Overlander is designed with crossovers and small SUVs in mind. It is a multispoked wheel with rouged rally aesthetics. The Overlander has everything you’d expect from an Enkei wheel – built strong, with industry-leading quality standards, and designed to last. If you’re looking for a strong rugged wheel, not only in looks but also in build quality, the new Enkei Overlander is made for you.

Important: The Overlander 18×8, 5×108 bolt pattern fitment is a Special Order part number. Special Order part numbers do not go into production until ordered and will likely have a longer delivery time. The Matte Gunmetal finish is also a Special Order finish on all Overlander part numbers. Please consult with an Enkei Wheels dealer for details on availability and delivery times.

Sizes 17, 18
Matte Black, Matte Bronze, Matte Gunmetal (Special Order only)
Spec-E Inspected

Category:

SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards. The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

Related products

This error message is only visible to WordPress admins

]]> RPF1RS https://enkei.com/shop/wheels/racing/rpf1rs/?utm_source=rss&utm_medium=rss&utm_campaign=rpf1rs Thu, 10 Nov 2022 22:07:12 +0000 https://enkei.com/?post_type=product&p=14228
  • Sizes 18x9.5, 18x10, 18x10.5, and 18x11
  • Available in Silver or Matte Dark Gunmetal
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology       Made in Japan Wheels]]>
    New Enkei RPF1 with lip - RPF1RS
    NEW
    RPF1 with big lip
    New Enkei RPF1 with lip - RPF1RS in Silver and Matte Gunmetal
    New Enkei RPF1 with lip - RPF1RS in Silver and Matte Gunmetal
    Enkei RPF1 Lip

    RPF1RS

    The RPF1RS is everything you love about the RPF1 with the addition of a deep face creating a large lip. The RPF1RS is made in Japan and has been in the works for years. We at Enkei wanted to make sure we created a “big lip” RPF1 that lived up to the strong structural quality you expect from us. It is available in low insets and even a negative inset for the 11″ wide version.

    The twin spokes on the Enkei RPF1RS achieve better stress dispersion on curves, hard braking, and extreme race driving.

    CENTER DESIGN: Enkei’s pocket design around the bolt circles increases rigidity and keeps the wheel cooler during aggressive race driving.

    MAT PROCESS: Shaping by the MAT process reduces wheel weight by 10%-15%. Every pound of unsprung weight savings has the effect of reducing overall vehicle weight by 20lbs.

    • Sizes 18×9.5, 18×10, 18×10.5, and 18×11
    • Available in Silver or Matte Dark Gunmetal
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology       Made in Japan Wheels

    Category:

    Welcome to Enkei Wheels
    Custom aftermarket wheels are as much a part of who we are as the clothes we wear, the vehicles we drive and of course the performance that we expect. ENKEI custom wheels deliver the latest in wheel designs, composite alloy technology such as, casting/forged processes, rigid testing that must pass stringent JGTC Standards and unsurpassed manufacturing facilities. Enkei is dedicated to perfection and delivers the best in aftermarket wheels. Make sure to sign up to our blog to keep up with Enkei Wheels' involvement in not only the motorsport scene but also the street car scene.

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         T6R https://enkei.com/shop/wheels/tuning/t6r/?utm_source=rss&utm_medium=rss&utm_campaign=t6r Fri, 12 Feb 2021 16:33:23 +0000 http://enkei.com/?post_type=product&p=13897
  • Sizes 17, 18
  • Matte Bronze, Gloss Black, Gloss Gunmetal
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology]]>
    Enkei T6R Tuning Series Wheels Gloss Black
    Enkei T6R Tuning Series Wheels Gloss Black wheels
    Enkei T6R Tuning Series Wheels Bronze wheels
    Enkei T6R Tuning Series Wheels Bronze wheels
    Enkei T6R Tuning Series Wheels Gunmetal
    Enkei T6R Tuning Series Wheels Gunmetal

    T6R

    Enkei is excited to introduce the all-new T6R to our lineup. We’ve taken some of the most dramatic design aspects that have made the TS-5 so popular and utilized them to build an equally awesome 6-spoke wheel. The T6R is an ideal option for modern sports coupes and sedans like the Civic Type R, WRX, STI, Q50, Q60, Golf GTI, and many others. Available from 17×8 up to 18×9.5 in finishes including our popular matte bronze, classic gloss black, and striking gloss gunmetal.

    • Sizes 17, 18
    • Matte Bronze, Gloss Black, Gloss Gunmetal
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         YX-5 https://enkei.com/shop/wheels/performance/yx-5/?utm_source=rss&utm_medium=rss&utm_campaign=yx-5 Wed, 28 Oct 2020 18:41:10 +0000 http://enkei.com/?post_type=product&p=13706
  • Sizes 17, 18, or 20 inch
  • Gunmetal
  • Spec-E Inspected
    • ]]>
    Enkei SUV wheels Crossover wheels mesh wheels
    Enkei SUV wheels Crossover wheels mesh wheels

    YX-5

    The all-new Enkei YX-5 is big and bold in all the right ways. It takes the split 5-spoke design that Enkei has perfected many times over and sharpens all of its edges to create an ultramodern design to perfectly complement today’s sports sedans and unibody SUVs. The YX-5 is available in 17”, 18”, and 20” sizing. All specs come in our gloss gunmetal finish and include Enkei’s signature flat center cap.

    • Sizes 17, 18, or 20 inch
    • Gunmetal
    • Spec-E Inspected

    Category:

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards. The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         PX-10 https://enkei.com/shop/wheels/performance/px-10/?utm_source=rss&utm_medium=rss&utm_campaign=px-10 Wed, 28 Oct 2020 17:22:55 +0000 http://enkei.com/?post_type=product&p=13698
  • Sizes 16, 17, 18, or 19 inch
  • Gloss Black or Gunmetal
  • Spec-E Inspected
    • ]]>
    Enkei PX-10
    Enkei PX10 Gunmetal Wheels

    PX-10

    The all-new PX-10 is the perfect option for those looking to add a sporty upscale look to their daily drivers. Featuring 10 evenly spaced spokes that terminate before reaching the flange to give the wheel a small lip, the PX-10 is all about being understated. The PX-10 is available in both gloss black and gunmetal in sizes ranging from 16” all the way up to 19”. The PX-10 is finished off with Enkei’s signature flat center cap.

    • Sizes 16, 17, 18, or 19 inch
    • Gloss Black or Gunmetal
    • Spec-E Inspected

    Category:

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards. The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         CYCLONE https://enkei.com/shop/wheels/truck-suv/cyclone/?utm_source=rss&utm_medium=rss&utm_campaign=cyclone Wed, 28 Oct 2020 16:40:39 +0000 http://enkei.com/?post_type=product&p=13689 A follow-up to the groundbreaking RPT1, the Cyclone is sure to take the truck world by storm. The Cyclone utilizes Enkei’s innovative MAT technology to build a wheel that is both lightweight and strong. With an ultra-clean design and super concave spokes, the Cyclone is exactly what a truck wheel should be: tough, durable, and easy to clean. When performance and utility take precedence over bling, the Cyclone is the obvious choice. Available in 16”, 17”, and 18” sizes in matte black, gunmetal, and Bronze in limited sizes/fitments. The Cyclone is the perfect option for the overlander or weekend trails truck.

    • Sizes 16, 17, 18
    • Available in Matte Gunmetal or Matte Black
    • Spec-E Inspected
    • MAT Technology
    Enkei MAT Technology ]]>
    Enkei Bronze Truck Wheel
    NEW
    Enkei Bronze Truck Wheel
    Enkei Truck Wheels for Tacoma RPT1 and Cyclone Concave
    Enkei Truck Wheels 4Runner

    CYCLONE

    A follow-up to the groundbreaking RPT1, the Cyclone is sure to take the truck world by storm. The Cyclone utilizes Enkei’s innovative MAT technology to build a wheel that is both lightweight and strong. With an ultra-clean design and super concave spokes, the Cyclone is exactly what a truck wheel should be: tough, durable, and easy to clean. When performance and utility take precedence over bling, the Cyclone is the obvious choice. Available in 16”, 17”, and 18” sizes in matte black, gunmetal, and Bronze in limited sizes/fitments. The Cyclone is the perfect option for the overlander or weekend trails truck.

    • Sizes 16, 17, 18
    • Available in Matte Gunmetal or Matte Black
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process is critical to improving drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheel's hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards. The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         PF09 https://enkei.com/shop/wheels/racing/pf09/?utm_source=rss&utm_medium=rss&utm_campaign=pf09 Wed, 28 Oct 2020 16:20:20 +0000 http://enkei.com/?post_type=product&p=13682
  • Sizes 16, 17, 18
  • Matte Gunmetal or Dark Silver
  • Spec-E Inspected
  • MAT Technology
    •         Made in Japan Wheels]]>
    Enkei PF09 Racing Series Wheel in Matte Gunmetal
    Enkei PF09 Racing Series Wheel in Matte Gunmetal
    PF09 Dark Silver
    PF09 Dark Silver

    PF09

    The PF09 is the latest addition to Enkei’s Racing Series lineup. Featuring 9 smartly contoured spokes designed to curve around big brakes found on modern sports cars, the PF09 is an excellent choice for track day enthusiasts and weekend autocrossers alike. The PF09 is available in sizes ranging from 16×7 to 18×10.5 and is available in Enkei’s Dark Silver or Matte Gunmetal Finish. All PF09s feature Enkei’s signature flat center cap.

    • Sizes 16, 17, 18
    • Matte Gunmetal or Dark Silver
    • Spec-E Inspected
    • MAT Technology

            Made in Japan Wheels

    Category:

    Welcome to Enkei Wheels
    Custom aftermarket wheels are as much a part of who we are as the clothes we wear, the vehicles we drive and of course the performance that we expect. ENKEI custom wheels deliver the latest in wheel designs, composite alloy technology such as, casting/forged processes, rigid testing that must pass stringent JGTC Standards and unsurpassed manufacturing facilities. Enkei is dedicated to perfection and delivers the best in aftermarket wheels. Make sure to sign up to our blog to keep up with Enkei Wheels' involvement in not only the motorsport scene but also the street car scene.

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         TS-7 https://enkei.com/shop/wheels/tuning/ts-7/?utm_source=rss&utm_medium=rss&utm_campaign=ts-7 Wed, 28 Oct 2020 15:04:31 +0000 http://enkei.com/?post_type=product&p=13672
  • Sizes 18
  • Matte Bronze, Gloss Black, Storm Grey
  • Spec-E Inspected
  • MAT Technology
    • Enkei MAT Technology]]>
    Enkei TS7 TS-7 Tuning Series Bronze Wheels
    Enkei TS7 TS-7 Tuning Series Bronze Wheels
    Enkei TS7 TS-7 Tuning Series Silver Wheels
    Enkei TS7 TS-7 Tuning Series Silver Wheels
    Enkei TS7 TS-7 Tuning Series Gloss Black Wheels
    Enkei TS7 TS-7 Tuning Series Gloss Black Wheels

    TS-7

    The TS-7 is Enkei’s newest addition to the Tuning Series lineup. In fact, the TS-7 is essentially a revival of the classic Enkei RS-7. It’s not just a recreation of the old wheel though. The TS-7 utilizes Enkei’s innovative MAT technology in order to build a wheel that is both lightweight and strong. The TS-7 is available in gloss black, bronze, and storm gray, and all specs come with Enkei’s signature flat center cap. With sizing ranging from 18×8 up to 18×9.5, the TS-7 is a solid choice for cars like the Subaru WRX STI, Civic Type R, Toyota GT86, and many others.

    • Sizes 18
    • Matte Bronze, Gloss Black, Storm Grey
    • Spec-E Inspected
    • MAT Technology

    Enkei MAT Technology

    Category:

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>         GTC02 https://enkei.com/shop/wheels/racing/gtc02/?utm_source=rss&utm_medium=rss&utm_campaign=gtc02 Sun, 29 Dec 2019 17:11:24 +0000 http://enkei.com/?post_type=product&p=10068
  • Sizes 18, 19
  • Hyper Silver or Matte Black
  • Spec-E Inspected
  • MAT Technology
    •         Made in Japan Wheels]]>
    Enkei GTC02 Hyper Silver Concave
    Enkei GTC02 Hyper Silver Face
    Enkei GTC02 Matte Black Concave
    Enkei GTC02 Matte Black Face

    GTC02

    Racing is where all of the best R&D happens. Engineers obsess over every detail looking for the slightest advantage to shave fractions of a second off of lap times. What we learn on the world’s premier circuits is eventually implemented into mainstream products and made available to the weekend racer. That’s how the new Enkei GTC02 was born. Based on the RA series wheels used in the Super GT racing series, the GTC02 pulls from the same bag of tricks as the RA series to give weekend racers the competitive edge they need to win. Utilizing a 6 split-spoke design that disperses stresses efficiently allows us to keep the spokes as thin as possible and make cuts in them on the fronts and sides to shave weight even further. The GTC02 is available in sizing ranging from 18×8 to 19×10.5 in a wide variety of PCD and offset configurations to fit most modern sports cars.

    • Sizes 18, 19
    • Hyper Silver or Matte Black
    • Spec-E Inspected
    • MAT Technology

            Made in Japan Wheels

    Category:

    Video Rundown

    – Twin Radiation Dimple: Contributes to weight reduction and raises the wheel’s heat disapation.

    – H Cross Spoke: Securing strength and rigidity while reducing weight by milling in parts with less stress.

    – 3 Face Types: Front, Middle, and Rear. Achive optimal concave for the vehicle. Face type will be determined by Size, Width, and offset combination.

    Welcome to Enkei Wheels
    Custom aftermarket wheels are as much a part of who we are as the clothes we wear, the vehicles we drive and of course the performance that we expect. ENKEI custom wheels deliver the latest in wheel designs, composite alloy technology such as, casting/forged processes, rigid testing that must pass stringent JGTC Standards and unsurpassed manufacturing facilities. Enkei is dedicated to perfection and delivers the best in aftermarket wheels. Make sure to sign up to our blog to keep up with Enkei Wheels' involvement in not only the motorsport scene but also the street car scene.

    MAT Technology
    Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

    SPEC-E
    All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.

    Related products

    This error message is only visible to WordPress admins

    ]]>